Table 1.mechanical properties
|2||Tensile Strength(≥KN/m)||Warp direction: 6.3 latitude: 5.5|
|3||Tear resistance (drop hammer method ≥ N)||Warp direction:5.0 latitude:5.0|
Table 2. chemical properties
|1||Anti-toxic mustard gas purity(95% 36℃±1℃×130min)||No penetration|
|2||Cold resistant (-40°C×5min folding 180°)||No crack|
Three-in-two solution (6N hydrochloric acid, 6N sulfuric acid,
36 ° C ± 1 ° C × 1 h)
|4||Resistance to gasoline breakage (dip 120# gasoline through 30s)||No cracks, no stickiness|
|5||Hot air aging (140 °C ± 2 °C × 8h)||Not sticky, not brittle|
|6||Acid resistance (plastic surface after tape pickling)||No discoloration, cracks and stickiness|
|9||Pitch density (needle / 5cm)||12~15|
2.Mainly suitable for the following occasions
1. Atomic bomb test.
2. Optical, anti-missile liquid propellant, and exhaust gas
generated when high-energy fuel is burned.
3. The operator of the oxidant and the combustion agent is used in
the operations such as filling and transferring.
4. Carbon monoxide, phosgene, sarin, mustard gas, etc.
5. Anti-acid and alkali-proof under specific circumstances.
6, anti-nuclear radiation adhesion.
7. Maintenance of grain depots, chemical plants, urban construction
8, airtight, dustproof, waterproof, moisture-proof, sand-proof.
9, also widely used in camping training, underground oil fields,
10. The chemical protective clothing produced by our factory can
also integrate anti-virus, flame-retardant, anti-static,
heat-insulating, acid-proof, anti-radiation and other functions
into one, so that it has comprehensive performance to meet
different industries and users in different environments. Special
1. When the chemical protective clothing is contaminated with
harmful poisons or other contaminants, immediately rinse it with
neutralizing liquid and water after completion of the operation,
and dry it inside and outside to avoid corrosion and mildew.
2. When using and cleaning chemical protective clothing, do not
touch sharp objects to avoid mechanical damage.
3, when the chemical protective clothing and gloves are stored, the
outside should be wiped with a layer of talcum powder.
4, chemical protective clothing should be folded neatly, boxed
storage, do not squeeze.
5. When storing chemical protective clothing, it is required to be
dry and free of organic solvent vapor.
6. The storage period is seven years.
4. Size: L :180cm-185cm